Toyota Sequoia main

How To Reset Toyota Sequoia Maintenance Light? [Step-by-Step]

When people take their car in for maintenance, or if it isn’t quite ready yet, but for some reason, their service light is turned on, they frequently ask the question.

It is fairly simple to reset the maintenance notification light in your Sequoia, regardless of whether the mechanic who worked on your vehicle failed to turn it off or for any other reason.

How To Reset Toyota Sequoia Maintenance Light
How To Reset Toyota Sequoia Maintenance Light

But how to reset Toyota Sequoia maintenance light? Read the entire article!

Let’s go get it.

Overview

The Tundra pickup truck served as the basis for Toyota’s development of its full-size SUV, the Toyota Sequoia, which was derived from the Tundra.

Initial planning for the first-generation Sequoia that was done by head engineer Kaoru Hosegawa aimed the Sequoia directly at the Ford Expedition and other full-size SUVs.

Tundra pickup truck
Tundra pickup truck

The Sequoia was initially introduced in the year 2000 and is manufactured at Toyota Motor Manufacturing Indiana in Princeton, Indiana.

The Sequoia is the first car from a Japanese manufacturer to enter North America’s popular mainstream full-sized SUV segment.

The Toyota Sequoia is currently the largest SUV that is being manufactured under the Toyota brand. It is positioned in the North American Toyota SUV lineup between the more affordable Toyota 4Runner and the more luxurious Toyota Land Cruiser.

In 2015, the Sequoia was only offered in long wheelbase (LHD) configuration. It could be purchased in Bolivia, Canada, Costa Rica, Honduras, Guatemala, Chile, Mexico, Bahrain, Kuwait, Lebanon, Oman, Qatar, Saudi Arabia, the United Arab Emirates, and Yemen.

It was also available in all regions of the United States.

As of the year 2017, the Sequoia was made available for purchase in the following countries: the United States of America, Canada, Costa Rica, Mexico, Bahrain, Kuwait, Lebanon, Oman, Qatar, and Saudi Arabia.

Toyota Sequoia 2000-2007 Maintenance Reset

PHASE 1:

Activate the ignition by turning the key. It is not safe to start the engine.

PHASE 2:

To display the ODO information, press the ODO/TRIP BUTTON.

PHASE 3:

Turn off the ignition.

PHASE 4:

Depress and maintain pressure on the ODO/TRIP BUTTON while turning the ignition to the “RUN” position.

Keep turning the knob for at least five seconds until the number “000000” appears on the screen.

PHASE 5:

After that, turn off the ignition.

This concludes the Service Maintenance Required Reset process.

Resetting the 2007–2020 Toyota Sequoia Oil Maintenance Interval Indicator

2020 Toyota Sequoia Oil Maintenance Interval Indicator
2020 Toyota Sequoia Oil Maintenance Interval Indicator

PHASE 1:

Activate the ignition by turning the key. It is not safe to start the engine.

PHASE 2:

To display the TRIP A information, press the ODO/TRIP BUTTON.

PHASE 3:

Turn off the ignition.

See also  What Problems Do Toyota Prius Have? [Answered]

PHASE 4:

As you turn the ignition to “RUN,” keep your finger on the ODO BUTTON.

Keep holding the ODO/TRIP BUTTON for at least five seconds until the message “000000” is displayed.

PHASE 5:

Turn off the ignition. The Maintenance Reset Has Been Finished.

What Does the Light Mean When It Says Maintenance Is Required?

The “MAINT REQD” message that appears on your dashboard is the Toyota maintenance indicator light.

It’s a light that stays on all the time, letting you know that you need to get your oil changed at a place that’s been inspected and approved by the government.

Performing regular oil changes on your Toyota can help increase the vehicle’s fuel efficiency and make the engine function more smoothly.

Additionally, it will lessen the amount of wear and tear on the components, which will result in significant cost savings in the long run.

This light will illuminate itself as a reminder to change the oil in your vehicle every 5,000 miles, and it will do so automatically. It is essential to be aware that the presence of the light in your dashboard does not necessarily indicate that your vehicle has sustained damage.

As a result, you can continue to use your vehicle without risk even if the light is illuminated.

Because the Toyota maintenance light counts those 5,000 miles solely based on the odometer’s readings, it has no method of determining whether or not the oil has been changed in the interim.

Because of this, the light can become very irritating if, after you have just changed your oil, it continues to flash on your dashboard urging you to do it again.

It is possible that the mechanics who service your Toyota vehicle will forget to turn off the maintenance required light, in which case you will have to do so yourself.

What do I need to do to turn off the Maintenance Required Light?

Turn off the Maintenance Required Light
Turn off the Maintenance Required Light

The process of resetting is, thankfully, not at all hard, and it is compatible with the vast majority of Toyota models.

It is a good idea to understand how to do it on your own so that you may avoid having to make another trip to the auto shop simply to have it reset.

The following is what you are need to do:

1. Please start your vehicle.

Make sure the key is in the on position and check the information displayed on the dashboard.

Instead of showing the trip meter, the odometer should read out the miles traveled.

2. After turning off the vehicle, press the button labeled “Trip Meter Reset.”

After you have turned the key off, you will need to make sure that the maintenance necessary light is turned off by pressing the button that is located on the trip meter reset.

See also  Which Model Of Toyota Shares Its Name With A City In Washington State? [Answered]

Keep your finger on this button for a time.

This is the button that, on some models, allows you to go from viewing the odometer to reading one of the other two trip meters.

3. Activate the Motor Vehicle Again.

While holding down the reset button, move the key to the “on” position with very light pressure.

Check to see that it is in this position rather than the “start” one, which is the one that activates the engine.

Now, give the odometer button your whole focus and attention.

4. Maintain your finger’s pressure on the Reset button.

Check to see that the button for resetting the trip meter is still pushed while you are looking at the odometer.

The odometer will begin to show a string of dashes on the screen in the following format:

After some time has passed, a string of zeros will start to appear.

Keep pressing the button until the display on the screen returns to its usual odometer reading.

5. Let go of the button labeled “Reset.”

After the normal odometer readings have been displayed on the screen, you may now let go of the reset button and start the engine of your vehicle. It is expected that the maintenance required light will no longer illuminate on your dashboard.

If the light continues to show up, you will need to go through the method once more until the maintenance light disappears from your dashboard.

Because you reset the maintenance required light manually, its counter is been reset to zero.

It will keep counting the miles that have been driven off of the odometer until it reaches the mark of 5,000 miles.

When this occurs, the warning light will flash on and off again on your dashboard. If the mechanics at your car shop are unable to turn off this warning light, you will need to do it yourself by repeating the instructions outlined above.

It is important to keep in mind that the procedure for particular Toyota Corolla models may vary slightly from one another.

It’s possible, for instance, that you have to maintain pressure on the toggle knob of the odometer for twenty seconds while turning the key off. After you have completed that step, turn the key back on, but do not start the vehicle.

On your dashboard, the maintenance reminder light should start flashing at this point.

See also  How Much Can A Toyota Prius Tow? [Answered]

Hold the button down until the indicator light on your dashboard turns out.

You must continue to do this. It is essential to maintain pressure on the reset button for at least twenty seconds in order for this method to be effective.

Toyota Car Models

  • Toyota Tacoma
  • Toyota Corolla
  • Toyota Camry
  • Toyota Tundra
  • Toyota Highlander
  • Toyota RAV4
  • Toyota Yaris
  • Toyota Prius

FAQ on How To Reset Toyota Sequoia Maintenance Light

How do I turn off the maintenance required light on my Toyota?

Turn the key to position two while maintaining pressure on the dashboard odometer button. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

How do I turn off the maintenance-required light?

How do I turn the “Maint Reqd” light back on?
-Switch the ignition to the ON position.
-Set the trip display to TRIP A mode on the odometer.
-Activate the OFF position on the ignition switch.
-Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
-It will do so via the service maintenance reminder light.

Why is my maintenance required light on after the oil change?

Second, restarting the counter after changing the oil involves resetting the maintenance required light. As a consequence, you may travel securely on roads and you won’t need to manually count the miles since, after 5,000 miles, this light will alert you that it’s time for a fresh oil change.v

How do you reset the maintenance light on a 2013 Toyota Sienna?

Response given by:
-Ensure that Trip A is selected on your odometer.
-Turn off your vehicle.
-To reset the odometer, press and hold the button.
-Turn on your car while holding down the button.
-Keep pressing the button until the Trip A odometer reads 0.
-Press the button again to turn off your car.

How do you turn off the maintenance-required light on a 2005 Toyota Tundra?

Tundra Maintenance Light Reset for 2000–2006 Models
Completely shut off the car. the “Trip” button while holding it down. Hold the “Trip” button down while turning the ignition to “On” without starting the car. Release the “Trip” button after the trip meter reads “all zeros.”

Similar Posts