How To Reset Toyota Tundra Maintenance Light? [Step-by-Step]

Every time the Toyota Tundra travels 5,000 miles, an indicator light that says “Maintenance Required” will turn on in the instrument cluster.

This maintenance indicator light does not indicate an emergency; rather, it serves as a friendly reminder that you should probably get your oil changed at the Toyota Service Center that is located closest to you.

When you have traveled more than 5,000 miles since the last time the maintenance lamp was reset, your odometer instrument cluster will notify you automatically by turning on the maintenance light.

This light is standard equipment on all second-generation Toyota Tundra pickup trucks; hence, it is highly possible that you will experience a time when this light illuminates, regardless of whether you purchased your Tundra new or used.

To know How To Reset Toyota Tundra Maintenance Light, read the entire article!

Resetting the Maintenance Light

Regardless of whether you service your Tundra at your local dealership or change the oil yourself, you will be required to reset this indicator light once the oil has been changed.

This is the case even if you do not replace the oil yourself.

The car dealership is the only place that can reset the maintenance required light for you, and they will usually do so even if you don’t ask them to.

In the event that they do not remember to reset the light, you can ask them to do so, and they should not have any issue doing so for you.

You will be required to go through the Tundra maintenance reset method in the event that you are mechanically minded and decide to change the oil on your own.

The maintenance indicator will be deactivated as a result of this procedure, and the countdown until the next time it illuminates will be reset to 5,000 miles.

The process of resetting the oil indicator light on your Tundra is straightforward and does not involve the use of any tools or supplies.

Nevertheless, before undertaking any kind of vehicle maintenance, it is always a good idea to check the owner’s manual for your Toyota Tundra for any information that might be relevant.

This article will walk you through the process of resetting the oil change indication light on your Toyota Tundra.

Resetting the Maintenance Check Engine Light on a 2018 Tundra Model

• Choose “Vehicle Settings” from the available options on the multi-information display.
• Choose the “Maintenance Reset” option.
• Choose yes, then hit the button.

2007-2017 Models Tundra Maintenance Light Reset

• The ignition should be turned to the “On” position, but the engine should not be started. If your vehicle has push-button controls, you should avoid pressing the brake pedal and instead press the “Start” button.
• You can change the display to “Trip A” by hitting the button that either changes the display or the button labeled “Trip.”
• Completely turn off the engine of the vehicle.
• While holding it down, press the “Trip” button.
• While you continue to hold the “Trip” button, switch the ignition to the “On” position. Do not start the engine at this time.
• Release the “Trip” button once the meter for the total number of trips has been reset to zero.

2000-2006 Tundra Models: How to Reset the Maintenance Light

• However, turn the ignition to the “On” position before attempting to start the engine. If your vehicle is equipped with push-button controls, you should keep your foot off the brake pedal and instead press the “Start” button.
• Simply hitting the “Trip” button will cause the screen to change to show the current miles being recorded by the odometer.
• Completely turn off the engine of the vehicle.
• While holding it down, press the “Trip” button.
• While you continue to hold the “Trip” button, switch the ignition to the “On” position. Do not start the engine at this time.
• Release the “Trip” button once the meter for the total number of trips has been reset to zero.

Troubleshooting

After you have completed the steps necessary to reset the “Maintenance Required” light on your Toyota Tundra, the “Maintenance Required” oil change indicator light should no longer be illuminated.

In the event that the light cannot be effectively reset, the following are some options available to you:

After you have ensured that your digital odometer is configured to display the current odometer reading, you should attempt to carry out the procedure once more.

In the event that this does not work and the indicator light continues to glow, you might want to consider removing the battery from your Tundra.

When you take the battery out of the device for a few minutes and then put it back in, the device’s built-in computer will be forced to reset itself.

If the indicator light is still illuminated at this point, you should consult the owner’s manual that came with your Tundra or get in touch with the Toyota dealership in your area for additional guidance.

What Does the Light Mean When It Says Maintenance Is Required?

The “MAINT REQD” message that appears on your dashboard is the Toyota maintenance indicator light.

It’s a light that stays on all the time, letting you know that you need to get your oil changed at a place that’s been inspected and approved by the government.

Performing regular oil changes on your Toyota can help increase the vehicle’s fuel efficiency and make the engine function more smoothly.

Additionally, it will lessen the amount of wear and tear on the components, which will result in significant cost savings in the long run.

This light will illuminate itself as a reminder to change the oil in your vehicle every 5,000 miles, and it will do so automatically. It is essential to be aware that the presence of the light in your dashboard does not necessarily indicate that your vehicle has sustained damage.

As a result, you can continue to use your vehicle without risk even if the light is illuminated.

Because the Toyota maintenance light counts those 5,000 miles solely based on the odometer’s readings, it has no method of determining whether or not the oil has been changed in the interim.

Because of this, the light can become very irritating if, after you have just changed your oil, it continues to flash on your dashboard urging you to do it again.

It is possible that the mechanics who service your Toyota vehicle will forget to turn off the maintenance required light, in which case you will have to do so yourself.

What do I need to do to turn off the Maintenance Required Light?

The process of resetting is, thankfully, not at all hard, and it is compatible with the vast majority of Toyota models.

It is a good idea to understand how to do it on your own so that you may avoid having to make another trip to the auto shop simply to have it reset.

1. Please start your vehicle.

Make sure the key is in the on position and check the information displayed on the dashboard.

Instead of showing the trip meter, the odometer should read out the miles traveled.

2. After turning off the vehicle, press the button labeled “Trip Meter Reset.”

After you have turned the key off, you will need to make sure that the maintenance necessary light is turned off by pressing the button that is located on the trip meter reset.

Keep your finger on this button for a time.

This is the button that, on some models, allows you to go from viewing the odometer to reading one of the other two trip meters.

3. Activate the Motor Vehicle Again.

While holding down the reset button, move the key to the “on” position with very light pressure.

Check to see that it is in this position rather than the “start” one, which is the one that activates the engine.

Now, give the odometer button your whole focus and attention.

4. Maintain your finger’s pressure on the Reset button.

Check to see that the button for resetting the trip meter is still pushed while you are looking at the odometer.

The odometer will begin to show a string of dashes on the screen in the following format:

After some time has passed, a string of zeros will start to appear.

Keep pressing the button until the display on the screen returns to its usual odometer reading.

5. Let go of the button labeled “Reset.”

After the normal odometer readings have been displayed on the screen, you may now let go of the reset button and start the engine of your vehicle. It is expected that the maintenance required light will no longer illuminate your dashboard.

If the light continues to show up, you will need to go through the method once more until the maintenance light disappears from your dashboard.

Because you reset the maintenance required light manually, its counter is been reset to zero.

It will keep counting the miles that have been driven off of the odometer until it reaches the mark of 5,000 miles.

When this occurs, the warning light will flash on and off again on your dashboard. If the mechanics at your car shop are unable to turn off this warning light, you will need to do it yourself by repeating the instructions outlined above.

It is important to keep in mind that the procedure for particular Toyota Corolla models may vary slightly from one another.

It’s possible, for instance, that you have to maintain pressure on the toggle knob of the odometer for twenty seconds while turning the key off. After you have completed that step, turn the key back on, but do not start the vehicle.

On your dashboard, the maintenance reminder light should start flashing at this point.

Hold the button down until the indicator light on your dashboard turns out.

You must continue to do this. It is essential to maintain pressure on the reset button for at least twenty seconds in order for this method to be effective.

Toyota Models

• Toyota RAV4
• Toyota Yaris
• Toyota Camry
• Toyota Highlander
• Toyota Land Cruiser
• Toyota Tacoma

FAQ on How To Reset Toyota Tundra Maintenance Light