Toyota c hr main

How To Reset Toyota C-HR Maintenance Light? [Step-by-Step]

The Toyota maintenance light will immediately notify you of any necessary repairs that need to be made to ensure that your vehicle continues to perform at its peak for many years to come.

It is possible that once the necessary repairs have been done, you will need to reset your service light.

How To Reset Toyota C-HR Maintenance Light
How To Reset Toyota C-HR Maintenance Light

This is true whether you are performing routine maintenance or dealing with unforeseen problems.

Just follow our straightforward instructions below to manually and digitally reset the Toyota C-HR maintenance light on your vehicle’s dashboard display.

Overview

Toyota C HR is a subcompact crossover SUV, and it is one of the company’s offerings. 2013 marked the beginning of the development of the vehicle, which was overseen by Toyota’s top engineer, Hiroyuki Koba.

The production model of the C-HR was shown for the first time at the Geneva Motor Show in March 2016, and manufacturing of the vehicle began in November of the same year.

On December 14, 2016, it was introduced to the Japanese market as a new vehicle.

Early in 2017, it was made available to consumers in North America, Europe, Australia, and South Africa.

The following year, 2018, saw its launch in Southeast Asia, China, and Taiwan.

The acronym C HR can refer to three different body styles: the Compact High Rider, the Cross Hatch Run-about, and the Coupé High-Rider.

How to Turn Off the Reset Maintenance Light on a Toyota

image 64
How to Turn Off the Reset Maintenance Light on a Toyota

After you have had maintenance performed on your car, you will be responsible for turning it off and resetting the light so that it may continue to track the state of your vehicle.

Follow the instructions/service tips below to learn how to reset the maintenance indicator and check the engine light on a 2022 Toyota C HR:

  • Insert your key into the ignition and turn it to position one, which is the position just before the start button on the dashboard.
  • Turn the key to position two, then push and hold the button that resets the trip meter that’s located on the dashboard.
  • Keep pressing and holding the button for the odometer for the next ten seconds. After that, the light should blink, followed by a possible beep, and then it should turn off.
  • After it has been turned off, the odometer button should be released before the car is started. To turn off the maintenance light on your Toyota RAV4, Highlander, Camry, Corolla, or any other model, you will need to repeat this method just one or two more times, and only if you notice that the light is still illuminated.
  • Should you continue to experience difficulties, this may be an indication that you will require extra services in the future. Bring it into the Toyota service care or nearest service center that serves your area so that your vehicle can undergo a comprehensive inspection/schedule service and you can get back on the road with safety recalls and test drive it.

2016-2022 Reset Instruction For The Toyota C-HR Oil Maintenance Required Light

1. To begin, you are going to move the switch on the dashboard to the “ignition on” position.

If your vehicle has a button that acts as an ignition, you need to push the START/STOP button twice while keeping your foot off the brake pedal.

2. Delete any previous messages.

In order to exit the main screen once you have entered the mode for turning the ignition on, you must backspace.

3. Head over to TRIP A.

After that, you will navigate to TRIP A by pressing the TRIP button located on the steering wheel.

4. Ensure that the ignition is turned off.

You are going to stop the vehicle as soon as you reach the beginning of Trip A.

5. After turning on the ignition, press and hold the TRIP button for a few seconds.

In order to turn off the maintenance indicator, press and hold the TRIP button while turning the ignition to the “on” position at the same time.

See also  How Long Do Toyota Tacoma Last? [Answered]

6. Continue to depress and hold the TRIP button.

Maintain constant finger pressure on the odometer button until the maintenance indicator disappears, at which point it will have been reset.

What Is The Meaning of My Toyota C HR’s Required Light?

It is necessary to become aware of the icon, a “MAINT REQD” light on your dashboard, before moving on to the process of learning how to reset the maintenance light for your C-HR.

Altering the oil in your vehicle on a regular basis has many advantages, including the following:

  • Improving your Toyota C-fuel HR’s efficiency
  • Making for a more pleasant time behind the wheel
  • Lessening of the amount of wear that is experienced by various vehicle components
  • Reduced need for expensive mechanical repairs caused by clogged engines, saving hundreds of dollars.

When you are starting to learn how to turn off the maintenance light, it is important to remember that the light itself does not reflect any damage to the vehicle, so it is still safe to drive the car for essential errands or to a repair center for an oil change.

This is something that you should keep in mind when you are learning how to turn off the maintenance light.

In spite of this, the light can be a source of annoyance if it continues to blink on the dashboard after you have recently had the oil changed.

Whether it’s because of a problem with the computer in your car or because a mechanic failed to reset the maintenance required light in your Toyota C-HR, the fact of the matter is that you’ll still need to understand how to reset the maintenance light in your C-HR in order to turn it off.

What Does the Light Mean When It Says Maintenance Is Required?

Toyota maintenance indicator light
Toyota maintenance indicator light

The “MAINT REQD” message that appears on your dashboard is the Toyota maintenance indicator light.

It’s a light that stays on all the time, letting you know that you need to get your oil changed at a place that’s been inspected and approved by the government. 

Performing regular oil changes on your Toyota can help increase the vehicle’s fuel efficiency and make the engine function more smoothly. 

Additionally, it will lessen the amount of wear and tear on the components, which will result in significant cost savings in the long run.

This warning light will come on every 5,000 miles as a reminder to replace the oil in your vehicle, and it will turn on automatically after each milestone. It is essential to be aware that the presence of the light on your dashboard does not necessarily indicate that your vehicle has sustained damage. 

As a result, you can continue to use your vehicle without risk even if the light is illuminated.

Because the Toyota maintenance light counts those 5,000 miles solely based on the odometer’s readings, it has no method of determining whether or not the oil has been changed in the interim. 

Because of this, the light can be really bothersome if it flashes on your dashboard shortly after you have changed your oil and it is telling you to do it again.

It is possible that the mechanics who service your Toyota vehicle will forget to turn off the maintenance required light, in which case you will have to do so yourself.

What do I need to do to turn off the Maintenance Required Light?

The process of resetting is, thankfully, not at all hard, and it is compatible with the vast majority of Toyota models.

It is a good idea to understand how to do it on your own so that you may avoid having to make another trip to the auto shop simply to have it reset. 

See also  How To Reset Toyota Corolla Maintenance Light? [Step-by-Step]

The following is what you need to do:

1. Start the engine of your vehicle.

Make sure the key is in the on position and check the information displayed on the dashboard. Instead of showing the trip meter, the odometer should read out the miles traveled.

2. Power down the vehicle and hit the button to clear the trip odometer.

After you have turned the key off, you will need to make sure that the maintenance necessary light is turned off by pressing the button that is located on the trip meter reset. 

Keep your finger on this button for a time.

This is the button that, on some models, allows you to go from viewing the odometer to reading one of the other two trip meters.

3. Restart the Engine of the Vehicle

While holding down the reset button, move the key to the “on” position with very light pressure. 

Check to see that it is in this position rather than the “start” one, which is the one that activates the engine. 

Now, give the odometer your whole focus and attention.

4. Maintain depressing the button labeled “Reset.”

Check to see that the button for resetting the trip meter is still pushed while you are looking at the odometer. 

The odometer will begin to show a string of dashes on the screen in the following format: 

After some time has passed, a string of zeros will start to appear. 

Keep pressing the button until the display on the screen returns to its usual odometer reading.

5. Let go of the button labeled “Reset.”

After the normal odometer readings have been displayed on the screen, you may now let go of the reset button and start the engine of your vehicle. 

It is expected that the maintenance required light will no longer illuminate your dashboard.

If the light continues to show up, you will need to go through the method once more until the maintenance light disappears from your dashboard.

Because you reset the maintenance required light manually, its counter is been reset to zero. 

It will keep counting the miles that have been driven off of the odometer until it reaches the mark of 5,000 miles. 

When this occurs, the warning light will flash on and off again on your dashboard. 

If the mechanics at your car shop are unable to turn off this warning light, you will need to do it yourself by repeating the instructions outlined above.

It is important to keep in mind that the procedure for particular Toyota Corolla models may vary slightly from one another. 

It’s possible, for instance, that you have to maintain pressure on the toggle knob of the odometer for twenty seconds while turning the key off. 

After you have completed that step, turn the key back on, but do not start the vehicle.

On your dashboard, the maintenance needed light should start flashing at this point. Hold the button down until the indicator light on your dashboard turns out. 

You must continue to do this. It is essential to maintain pressure on the reset button for at least twenty seconds in order for this method to be effective.

Why Is It Necessary for You to Turn Off the Maintenance Light?

Why Is It Necessary for You to Turn Off the Maintenance Light?
Why Is It Necessary for You to Turn Off the Maintenance Light?

Because the Toyota maintenance light does not go off by itself, it is in your best interest to switch it off manually so that there is one fewer thing to distract you on your dashboard.

As you navigate the streets of the city, this light may start to annoy you, and it may even lead you to believe that there is something wrong with your vehicle. In a similar vein, if a member of your family drives your Toyota and is unfamiliar with the significance of this indicator light, that person may become anxious and fear that the vehicle has been harmed.

See also  How Many Gallons Does A Toyota Avalon Hold? [Answered]

Second, you can reset the counter by turning off and then back on the maintenance necessary light once you have completed the oil change. As a consequence of this, you will be able to drive securely on public roads, and after 5,000 miles, this light will notify you that it is time for a new oil change. As a result, you will not have to manually tally the miles driven.

Toyota Models

  • Toyota Camry
  • Toyota Corolla Hatchback
  • Toyota Highlander
  • Toyota RAV4
  • Toyota Land Cruiser
  • Toyota Yaris
  • Toyota Tundra

FAQ on How To Reset Toyota C-HR Maintenance Light

How can I clear the maintenance light on my Toyota?

Insert your key into the ignition and turn it to position one, which is the position just before the start button on the dashboard. Turn the key to position two, then push and hold the button that resets the trip meter that’s located on the dashboard. Keep pressing and holding the button for the odometer for the next ten seconds. After that, the light should blink, followed by a possible beep, and then it should turn off.

After getting the oil changed, why is the maintenance necessary light still on?

In the vast majority of cases, this simply indicates that your car is in need of an oil change. In the event that the distance driven is greater than 5,000 miles after the maintenance data has been reset, the warning light will turn on and remain lit.

What does it mean when it says maintenance is required on my Toyota?

What Does It Mean to Have a “MAINT REQD”? After every 5000 miles driven since the last time, it was reset, the “MAINT REQD” light will illuminate. It is merely a mileage counter with the purpose of prompting the user to change the oil at the appropriate intervals. It in no way implies that there is a problem with the system.

Where can I find the instructions to turn off the maintenance-required light on my Toyota Corolla?

Find the button labeled “travel reset,” and then turn the key so that it is in the “On” position. Maintain your hold on the button labeled “trip reset” until the odometer reading displays “0” for the number of kilometers traveled. Following this, the maintenance light will no longer be active.

What could be causing my maintenance required light to flash?

The flashing of the maintenance light on your dashboard is, in most cases, your vehicle’s method of notifying you that you will need to take your vehicle in for service in the near future. The light is programmed to come on at regular intervals in order to alert drivers that they may need to get their oil changed or get their tuneup done soon.

Writer at Discover Seldric | + posts

Meet Jojiela Magsisi, a fervent car lover and gifted writer whose love affair with automobiles goes beyond the rev of an engine and the gleam of chrome. With a unique perspective and a talent for storytelling, Jojiela brings a fresh voice to the world of automotive journalism.

Similar Posts