Did you know that the Toyota Corolla is the most popular car on the planet?
Toyota sells Corollas at a rate of one every 15 seconds in more than 150 countries!
Even though Toyotas are recognized for generating some of the world’s most reliable automobiles, they do occasionally flash a maintenance required light on their dashboards.
This applies to all new Toyota cars, and it’s a warning sign that shouldn’t be ignored.
Have you noticed the light flashing on the dashboard of your automobile as well?
Do you want to know what it means?
If you answered yes, read on to find out more about the required maintenance light and how to turn it off.
On a Toyota push start, how do you turn off the maintenance necessary light?
While pushing and holding the dashboard odometer button, turn the key to position two.
Keep pressing the odometer button until the maintenance light comes on.
It’s possible that you’ll hear buzzer noises. The light should be turned off.
How to Reset Maintenance Required Light in a Toyota
Here’s a sample video on how to reset a maintenance required light in toyota.
What Is the Light That Requires Maintenance?
As a Toyota maintenance light, “MAINT REQD” may show on your dashboard.
It’s a light that stays on all the time, signaling that your oil needs to be changed at a reputable auto shop.
Changing the oil in your Toyota can help you save money on gas while also ensuring that your vehicle runs smoothly.
It will also reduce component wear and tear, which will save you a lot of money over time.
Every 5,000 miles, this engine light shines as a reminder to change your vehicle’s oil.
It’s critical to realize that the light on your dashboard does not signal that your vehicle has been damaged, so you can continue to drive safely even if the indicator is illuminated.
The Toyota maintenance light has no means of knowing if you’ve changed the oil in the interim because it depends solely on the odometer to count those 5,000 miles.
That’s why it can be aggravating if you’ve recently changed your oil and this light flashes on your dashboard reminding you to do so.
It’s possible that the mechanics who replace your Toyota’s oil fail to turn off the maintenance warning light, so you’ll have to do the toyota maintenance required light by yourself.
What is the procedure for resetting the Maintenance Required Light?
Fortunately, the procedure for resetting most Toyota models is straightforward and universal.
It’s an excellent idea to learn how to do it yourself so you don’t have to go back to the mechanic only to reset it.
Here’s what you need to do:
1. Turn Your Vehicle on.
With your key flipped to the on position, look at your dashboard.
On the odometer, the miles should be displayed rather than the trip meter.
2. Press the Trip Meter Reset Button after turning off the vehicle.
After you’ve turned the key off, make sure you hit the trip meter reset button to reset the maintenance necessary light.
For a few moments, press and hold this button.
3. Activate the vehicle again.
While turning the key to the “on” position, keep pressing the reset button.
Check that it is in this position, not the “start” position, which starts the engine.
At this time, pay close attention to the odometer.
4. Keep pressing the Reset Button.
While glancing at the odometer, make sure the trip meter reset button is still pressed.
The odometer will begin to display a series of dashes on the screen.
After a while, a string of zeros will appear.
Continue pressing the button until the odometer reading on the screen returns to normal.
5. Press and hold the Reset Button.
Remove the reset button and turn your car on once the standard odometer values appear on the screen.
The required maintenance light on your dashboard should no longer be visible.
If the light still on, repeat the procedure until the maintenance light on your dashboard goes out.
After you manually reset the maintenance required light’s counter, it has been reset to zero.
The trip odometer reset will continue to count miles until it reaches the 5,000-mile mark.
The light on your dashboard will turn back on when this happens.
If the specialists at your auto shop or on toyota service don’t reset the light, you’ll have to fix it yourself using the steps outlined above.
Keep in mind that depending on the Toyota Corolla model, the approach differs significantly on maintenance reminder.
For example, while the key is turned off, the odometer toggle knob may need to be pushed for 20 seconds.
Re-insert the key after that, but do not start the vehicle.
Your dashboard’s required maintenance light should begin to flicker.
Continue to keep the button down until the dashboard reset maintenance light turns off.
You must hold down the reset button for at least 20 seconds for this approach to work.
This step also works for other toyota vehicles like toyota highlander, toyota land cruiser, toyota 4runner, toyota tacoma, toyota rav4 and toyota sienna.
What Is the Purpose of Resetting the Maintenance Light?
Because the Toyota maintenance light does not go away on its own without ignition switch, it’s a good idea to switch it off personally so you have one less thing on your dashboard to deal with and check engine.
This service maintenance reminder light can become unpleasant as you drive about the city, and it may even lead you to believe that anything is wrong with your car.
Similarly, if someone in your family drives your Toyota vehicle and doesn’t understand what this light means, he or she may become concerned and believe the vehicle is damaged.
Second, after changing the oil, resetting the maintenance required light restarts the counter.
As a consequence, you can drive securely on roads, and this camry maintenance light will automatically notify you when it’s time for a new oil change after 5,000 miles, so you won’t have to count the miles manually.
While it’s simple to turn off the maintenance light on a Toyota Camry, remember to book a service appointment!
Your maintenance light illuminates when it’s time for a service, which is normally around 5,000 miles.
You should consider the following routine maintenance services at the 5,000-mile mark:
- Changing the oil
- Changes to the filter
- Rotation of tires
- Check the brakes
- Inspection with many points
The toyota service center professionals will gladly adjust your maintenance appointment based on the make and model of your vehicle, your driving style, and other considerations.
Frequently Asked Questions (FAQ)
How do I turn off the maintenance required light on my Toyota Corolla?
Toyota Corolla – Turn Off Maintenance Light
In the Corolla, place the keys.
Press and hold the trip reset button near the odometer until the center panel displays “Trip A.”
Return the key to the “Off” position.
Turn the key back to the “On” position while pressing the button to reset the trip.
How do you reset the maintenance light on a Toyota Tundra?
How to Reset the Maintaining. On a Toyota Tundra, there’s a light that’s required.
Press your trip odometer knob until “Trip A” appears, then turn your key to the “On” notch.
Switch your key to the “Off” position.
Hold the travel odometer knob down.
Allow for a system reset. …
When “Trip A” appears again, release the trip odometer knob.
How do you reset the maintenance light on a Toyota Tundra 2018?
Reset the Maintenance Light on the 2018 Toyota Tundra
Select “Vehicle Settings” from the multi-information display.
Choose “Maintenance Reset” from the drop-down menu.
“YES” should be selected and pressed.